Oblong Pro Flow Bait Tanks
Space-saving oblong tanks available
in 4 sizes come ready to fish. Connect to your bait pump
and you're off for the fishing grounds. The low profile
PF-17 and PF-27 fit under most leaning posts, model PF-22
and PF-32 are tall enough to drain over most outboard wells
or mount on your swim step. Models PF-27 and PF-32 come
with an additional drain at half water level, allowing the
water to be run half full, reducing weight.
| Model |
Capacity |
Width x Length x Height |
Weight/lbs. |
| PF-17 |
17 gal. |
15 ½" x 26½" x 17" |
152 |
| PF-22 |
22 gal. |
17" x 22" x 24¼" |
203 |
| PF-27 |
27 gal. |
17½" x 30" x 18¾" |
234 |
| PF-32 |
32 gal. |
17 ¾" x 26" x26¼" |
276 |
 Round
Pro Flow Bait Tanks
Kodiak offers three round tanks--a favorite
among many anglers, from our "easy to fit in tight places"
PF-14 to our large-capacity PF-45. Like all Pro Flow tanks
the walls are smooth with baffles flush to the tank walls
and nothing for the fish to collide with.
Schooling species of bait fish breathe by swimming while water
passes over their gills. When they are held in the relatively
small confines of a bait tank, the fish suffer from lack of
oxygen, as they cannon swim fast enough to provide enough
water to pass over their gills.
| Model |
Capacity |
Diameter x Height |
Weight/lbs. |
| PF-14 |
14 gal. |
16¼" x 23¼" |
123 |
| PF-26 |
26 gal. |
23" x 17" |
227 |
| PF-45 |
45 gal. |
29" x 18" |
385 |
Adjustable Water Height Bait Tanks
Pro Flow PF-42 and PF-52 allow the water
to be set at either 1/2, 3/4 or full capacity. The PF-37
may be set at 1/2 or full level. Changing the level is fast
and easy with our unique stand-pipe design.
Advantages to lowering the water level include reduced weight
and easier netting of the few remaining bait fish at the
end of the day. Note that our adjustable pipe is inside
an enclosed slotted drain baffle. This feature prevents
the fish from hitting the pipe and injuring themselves.
| Model |
Capacity |
Width x Length x Height |
Weight/lbs. |
| PF-37 |
37 gal. |
18" x 36" x 20" |
277 |
| PF-42 |
42 gal. |
21¾" x 27" x 31" |
367 |
| PF-52 |
52 gal. |
23" x 29¼" x 32" |
453 |
All 3 models may be ordered plumbed as shown for removable
deck mounting or with the water inlet and drain mounted on
the underside of the tank for permanent installation with
hoses below deck.
To see bottom view of below deck plumbed model click below.
Below Tank View
Model PF-37-2, PF-42-2 and PF-37-2 below deck stand pipe tank
The photo above shows the bottom of a PF-42-2 standpipe tank. On the PF-37,42 and 52-2 tanks the water comes in and out below the tank. Although this model allows for a very clean installation with no fittings or hoses above the deck it does not allow for quick removal. Two holes must be made in the deck and the hoses run under deck. You will need about 3 inches of clearance min. between the bottom of the deck and anything else, like the fuel tank. The inlet fitting is for 1" hose and the drain is for 1 1/2" hose.
Schooling species of bait fish breath
from swimming while allowing water to pass over their gills.
When held in the relative small confines of a bait tank
the fish suffer from lack of oxygen as they can not swim
fast enough to provide enough water to pass over their gills.
Pro Flow thanks, with their patented directional flow water
inlet baffle, allow water to enter evenly throughout the
entire water column. The slots in the baffle plate are cut
at an angle, directing water against the side wall and creating
a circular directional flow. This flow actually pushes fresh,
oxygen-rich water over their gills--which keeps the fish
swimming in the same direction and reduces collision, a
major cause of scale loss in bait tanks. A no-clog drain
baffle provides drainage over the entire water column. The
molded-in slosh guard keeps slosh and wet decks to a minimum.
The light dome in the bottom of the tank eases night time
access and prevents fish from hitting the walls in the dark.
All tanks come with mounting (L) brackets and a durable
molded cover and are covered by a no-nonsense 5-YEAR warranty.
Dimensions on all tanks do not include fittings
Thru-Hull Bait & Washdown Pumps
Thru-Hull Bait & Washdown Pumps You
won't have to worry about salt rusting out this pump! Its
non-corrosive design will stand up to even the harshest
environment. Low amperage per gallon of water output ration
is another real plus for boats with limited charging systems.
All Kodiak pumps are whisper quiet, so you won't scare the
fish away. Thru-Hull models feature full port 3/4" female
pipe thread for direct thru-hull mounting.
| Thru-Hull Mount |
Flow Per Min. |
Amperage Draw |
Suggested Bait Tank Size (gals.) |
| K360 |
3.4 |
1.8 |
7 to 16 |
| K500 |
5.0 |
2.3 |
17 to 30 |
| K700 |
8.8 |
3.5 |
30 to 40 |
| K1100 |
10.5 |
3.9 |
37 to 45 |
Kodiak transom-mount bait pumps are
available in 6 sizes for mounting under water on the transom,
flush with the bottom of the boat. Models KB-360 through
KB-1100 come with a quick-mount system for fast removal
back at the dock. Models KB-1500 and KB-2000, high-out-put
pumps, feature a solid aluminum anodized bracket to support
the pump. The built-in downward angle of the bracket allows
water pickup while moving.
| Transm Mount |
Flow Per Min. |
Amperage Draw |
Suggested Bait Tank Size (gals.) |
| KB360 |
3.4 |
1.8 |
7 to 16 |
| KB500 |
5.0 |
2.3 |
17 to 30 |
| KB700 |
8.8 |
3.5 |
30 to 40 |
Kodiak's new cartridge-style pump shown to the right is available
in 2 sizes, K500C and K700C thru-hull mount and KB500C and
KB700C transom mount. The motor snaps out of the water jacket,
allowing fast cleanout of weeks and it's easy on the water
replacement.
((CLICK HERE))
To On-Line Order A Motor Cartridge
NEW DUEL PORT BAIT PUMPS
Run bait pump and wash down pump off one thru-hull
Kodiak's new duel port thru-hull mounted
bait pumps are available in all 4 sizes, K-360 through K-1100.
Here is how they works. The bait pump mounts direct to your
shut off valve mounted to your thru-hull. The pump comes
with a plug in the port, remove the plug screw in a barb
fitting and run a hose to your wash down pump to supply
it water. Please note that you can only use a diaphragm
style wash down pump such as a Flo-Jet or Shur-Flo as the
diaphragm allows the bait pump to not suck air through it.
The extra port in the Kodiak pump acts as a water source
for your wash down pump only and does not put out pressure.
A. Bait Tank Light
12-Volt light fits under tank and shines through bottom
to illuminate tank. For night use. (One size fits all tanks.)
B. Solid Cutting Board Lid
1/2" thick pebble finish cutting board lid
PF 14C fits model PF-14 and PF-26
PF-22C fits model PF-22
PF-32C fits model PF-17, PF-27 and PF-32
PF-45C fits model PF-45
PF-52C fits model PF-37, PF-42 and PF-52
C. Quick Disconnect Mounting Pad
4 Low Profile pads mount permanently to deck or swim platform,
tank (L) brackets mount to pads. Tank and mounting (L) brackets
can be quickly removed, black anodized aluminum with hardware.
Model # PF-003, PF-004 (Fits PF-52 tank, 6 pads)
D. 90-Degree Drain Elbow
E. Net, Knife and Pliers Holder
5/8" thick mounting bar, unbreakable tube. Fits all tanks
except round tanks. Model PF-007
F. KW-1 Bait Tank Plumbing Kit
For the do-it-yourselfer. All the fittings and instructions
needed to build a standard live well. (These
are not used on Pro Flow Tanks.)
G. Single Tube Rod or Net Holder
Model #PF-010
H. Plier Holder
Model PF-009
I. Net Holder
Model PF-008
Combination Net & Plier Holder (not shown) Model
PF-011
All items will fit on all models of Kodiak tanks and
also on competitor's tanks.
Pro Flow Rod Holders
5/8" thick mounting bars form fit to
tank. With unbreakable molded tubes, hideaway hardware not
visible from outside of tank. May be ordered installed on
tank.
| Model No. |
Tubes |
| PF-14R |
3 |
| PF-17R |
4 |
| PF-22R |
4 |
| PF-27R |
5 |
| PF-32R |
4 (also fits PF-52 tank) |
| PF-42R |
5 |
 Weed
Guard
Keeps weeds out of the bait pump!
Thru Hull Screen fits over intake strainer; strainer does
not need to be removed for installation. Fits 3/4" Perko
and Groco intake strainers. Does not reduce flow to pump.
Lifetime warranty against breakage.
Model KTH-P 3/4
|
